Stainless Steel French Press – Frieling vs Espro

A few reasons make the Press pot a excellent preference for all coffee enthusiasts. Even though it is simply simple, it gives is very ease to utilize. The simplicity never comes as a disadvantage, and if you extremely want a delicious coffee cup, you can always rely on this modest coffee maker.

But, the traditional Cafetière has its own limitations and generally, the design flaw of the French pot puts off a good number of coffee lovers. A lot of people often complain about coffee getting cold easily, poor filtering system, (leaving grounds in the cup), and thin glass (easily breakable). In the end, even considering the very inexpensive, all these disadvantages dissuade people from purchasing this coffee maker.

French Pot Problems and Flaws

Do you understand that the flaws start with the pot itself? The glass walls of this coffee makeking device allow heat to dissipate extremely fast. Consequently, things get worse in two ways. When water cools down, the extraction recipe becomes slower and almost reaches at a minimum level. The flavor and aroma extraction stop after the first minute. When infusion temperature lowers, the coffee extraction is really poor. The other annoyance with thin walls is obviously the coffee temperature, your coffee will become cold after a few minutes, way too fast for most coffee enthusiasts.

The filtering is another disadvantage of French pots. Although the mesh filter is not bad, and it is great for all Turkish coffee lovers, including me, filter coffee aficionados may not love this coffee style. This filter always leaves some fine grounds in the cup.

Another disadvantage of the traditional, low-cost French pots, is that the beaker is brewed of thin, cheap glass and when you pour hot water really fast, it easily breaks. In order to respond to this problem, you need to pour water in two steps. Firstly, pour only a small amount of water to just cover the coffee grounds and allow the glass to warm up slowly. After that, you can add a little bit more water to warm up the glass a little bit more and wait another 10 seconds to transfer more heat to the glass. Then, you can add the remaining water. Though this method definitely addresses the problem, it cannot be described as the a lot of elegant way to prepare coffee.

Frieling French press – Polished Finish Mirrored Finish 36 oz

The Frieling Insulated French press is a step up from your average Press pot with its double wall insulation. It keeps its contents. Crafted of an all steel mesh plunger mechanism and double wall stainless steel, this coffee press is going to keep the beverages steaming hot and may also serve as a stylish pitcher for cold beverages like juice, milk, iced tea and water.

Make java that is wonderful the European way with these refined French presses from Frieling, a top provider to the restaurant and resort sector. Literally add ground coffee, pour in hot water and immediately press down the plunger for tasty fresh java on demand. Cafetière groundwork is also ideal for hot tea using free tea leaves. Crafted of mirror-finished 18/10 stainless steel with double insulated walls.

Frieling French Press

Product features:

  • Double-wall stainless steel French press for coffee or tea.
  • Polished with a mirror finish outside and brushed finish inside.
  • It’s hot – the double wall ensures your hot beverages for a long time.
  • Full length deal with is comfy in the hand.
  • Comes in four different sizes – choose your wonderful size.
  • Easy to disassemble for cleaning; dishwasher safe;
  • 5 year guarantee against manufacturing flaws

Frieling French press – Video Review

The Wonderful French Pot – Espro Coffee Press

How can you solve this problem and still make coffee in an elegant way? A Canadian company discussed as Espro has come up with an innovative model mentioned as ‘Espro Press’ and this unique coffee maker addresses all these disadvantages, normally associated with traditional French press coffee machines.

In order to enhance durability and troubleshoot the heat dissipation issues, Espro used stainless steel double wall, for their pot, and you can add as much water as you like without getting concerned about breaking the glass. The heat doesn’t break the pot, and even if you drop, or smash it, the pot will withstand the majority of abuse. It can take a few dents from clumsy people like me as well. The double wall of this coffee makeking equipment always maintains the brewing temperature for a longer time and you can enjoy full extraction at its best.

Do you feel annoyed when you find grits in the cup? You must not get disappointed because Espro Coffee Press solves this problem efficiently. The unique double micro filter provides a two-step filtering procedure and to prevent the accidental passage of coffee grounds into the cup, a silicon gasket is attached to the plunger. At the same time; this unique coffee machine always allows all the coffee oils to pass through the screen with wonderful ease. In a nutshell, the Espro press offers a bold, clean, full-bodied and black coffee and, all these innovations make it in truth popular among a huge number of French press coffee maker pot users.

Espro Press  P7 – Vacuum Insulated Stainless Steel Press

The Espro P7 is among the most advanced French press coffee makers. The brewer has two-stage filter that keeps the grounds out of your cup. There are most dual filter French presses, however Espro’s has a special design and they have a patent pending for that.

One particular design improvement is the double lip seal which prevents grounds to slip through the sides of the filter. The design likewise gives the plunge more stability against accidentally angling the plunger during the filtration.

Espro Insulated French Press

The vacuum insulated double walls maintain stable temperature during the brew, for more precise aromas. After brewing, the coffee stays hot in the press while the outside wall remains cool for hours.

Creating coffee in your Espro press follows the same procedure as a representative Cafetière.

Warm up the beaker, add coffee and water, stir, let it steep for 3 to 4 minutes, press and serve.

You have to troubleshoot down your brewing temperature because the excellent insulation will maintain a the brewing temperature for a long time, causing an over-extraction.

The Espro press filter design works as a buffer between your grounds and the brewed drink. So over extraction is less of a problem than with your average coffee press.

The filters are BPA, BPS and phthalate free, brewed in Canada with USA manufactured materials.

  • The double lip seal prevents grinds from sneaking past the micro-filters, and the buffer between the filters prevents over-extraction after brewing
  • Filters are BPA, BPS and phthalate free, made from American materials in Canada
  • The vacuum insulated double walls maintain stable temperature during the brew and keeps coffee hot for hours
  • Top rack dishwasher safe or hand wash with bottle brush
  • The two patent-pending filters get beneath the grinds and filter twice, leaving all of the flavor and none of the grit.
  • Assembled in Canada

Espro Coffee Press Video Review

This post was worth syndicating, all the credit goes to French press Coffee, a website that takes Cafetière brewing seriously. Check the original post here: How To Brew with a French press.